• 8909 Answers SOURCE: The location of the jumpers or dipswitches may vary; however, here are some locations of the jumpers / dipswitches. • On the edge of the motherboard - Most jumpers are located on the side of the motherboard for easy accessibility, verify by looking at all visible edges of the motherboard. • By the CMOS battery - Some manufactures will place the jumper to clear the CMOS / BIOS password by the actual battery. • By the processor - Some manufactures will place the jumpers by the processor of the computer.

Hannstar k mv 4 94v 0 schematics. Hannstar K Mv 94v Manual opens many online security with contacts which completed with PNG files, though limited. Feb 04, 2014 hannstar k mv 4 94v 0 schematics. I need a manual and diagram for my hannstar j mv-4 motherboard in my Toshiba satellite a200 laptop. Looking for HannStar J MV-4 specs. Hannstar K Mv 4 94V 0 Schematics for Windows. It's 100% safe! Related sites that may be useful: HANNSTAR J MV-4 94V. 0 1123 MotherBoard - Service.

However, note that in some cases these jumpers will be to change the processor and not the password. • Under the keyboard or bottom of laptop - If you are working on a the location of the dipswitch (almost never a jumper) can be under the keyboard or on the bottom of the laptop in a compartment such as the memory compartment. • Other visible location - While it is possible that the jumpers / dipswitches may not be in a visible location, most manufactures try to make things easier by placing the jumpers / dipswitches in another visible location. • Jumpers may also be found underneath or allongside the memory modules.

I hope this helps but suggest that the manufacturers web site or your instruction manual, may have the answer. Posted on Oct 23, 2010.